Skip to guide
Kabo setup
10 primary sources

Kabo Setup Guide: Find Your AI Assistant and Connect

To use Kabo in an AI assistant you already have, open its setup page, complete the installation, then finish Kabo sign-in. Find your app in the table below, then follow the setup notes for WorkBuddy, Doubao Work, Qwen Work, DeepSeek Harness, Grok Bot or Muse. If you use Codex, ChatGPT or Claude Code, you’ll find their installation links here too.

Find your assistant’s Kabo setup page

Find the exact app you already use, then open its setup link. A familiar brand name is not enough: Doubao Work, Qwen Work and DeepSeek Harness have their own connection steps.

If you use the command-based installer, check its results for the app you intend to use. The Kabo installer can install into more than one detected app. An installation result for another app does not confirm that yours is ready.

Your assistantBefore you startFinish connectingSetup link
WorkBuddy / WorkBuddy AIThe WorkBuddy desktop app uses its bundled CodeBuddy command line.Quit and reopen WorkBuddy, select Trust for Kabo in connector management, then sign in in your browser.Open setup
Doubao WorkUse the Work client with its custom-connector settings. The installer adds Skills first.Add the HTTP connector by hand, authorize it, then name the Skill in your message.Open setup
Qwen WorkChoose a project working folder for your Kabo sessions.Restart Qwen Work, sign in, and explicitly ask for the Skill you want.Open setup
DeepSeek HarnessNode.js must be available where the local connection bridge runs.Restart the app and complete browser sign-in.Open setup
Grok BotUse the Bot setup flow. Installation runs on the Bot’s cloud computer.Let the Bot finish installing and saving the Skills, then sign in through its Connect card.Open setup
MuseUse the Muse assistant’s custom-connector flow.Send the setup command, confirm Muse can find the Kabo Skills, then sign in through its Connect card.Open setup
Codex / ChatGPTFind Kabo in the shared plugin directory. Codex also supports command-based installation.Follow sign-in. In Codex, open a new task to load the plugin.Open setup
Claude CodeUse the Claude Code plugin workflow.Reload plugins or start a new session, then run /mcp and sign in to Kabo.Open setup

Scroll horizontally to read all columns.

The four newer desktop entries are WorkBuddy, Doubao Work, Qwen Work and DeepSeek Harness. Their setup pages are available in ten languages, for 40 localized pages. Use the language selector on the setup page if you need to match the app’s interface.

To run the Kabo installer with npx, the environment running it needs Node.js 18 or later, according to the installer’s package requirements. With Grok Bot, that environment is the Bot’s cloud computer. You do not need to install the package on your own computer for that route.

Kabo’s research Skills also use Python 3 and a working folder the assistant can read and write. The installation instructions explain how those pieces fit together. Check your specific client’s availability and requirements before starting.

Choose your assistant and install Kabo

WorkBuddy: restart, then trust the connector

Follow the WorkBuddy setup page for WorkBuddy and WorkBuddy AI. Check that the installation result includes WorkBuddy. Once its plugin is installed, quit WorkBuddy completely and reopen it. In connector management, find Kabo and choose Trust if prompted, then complete Kabo sign-in in your browser. If Kabo is already connected, continue to the connection check below.

Doubao Work: add the connection after installing Skills

The installer puts Kabo’s Skills in place, but you still need to add the connection in the app. In Doubao Work, open 插件 · 技能 · 工作台 → 管理 → 连接器 → 添加 → 自定义连接器 (Plugins · Skills · Workbench → Manage → Connectors → Add → Custom connector).

Choose HTTP, enter https://kabo.sh/mcp-pub, and leave headers empty. Click 去授权 (Authorize) to sign in to Kabo in your browser. Once connected, name the Skill in your message, such as start-with-kabo, because Doubao Work does not select Skills automatically.

If the Skills do not appear in Doubao Work, quit the app completely and reopen it.

Qwen Work: use a project folder and restart

After following the Qwen Work setup page, restart the app and finish browser sign-in. Choose a project working folder for the session so the Skills have somewhere to read and save their files. Explicitly naming start-with-kabo is a useful first step here too.

Try your first task while you are there to respond to any prompts. Qwen Work’s setup notes say unattended runs within a project still need verification.

DeepSeek Harness: keep Node.js available

The DeepSeek Harness setup uses a local mcp-remote bridge to reach Kabo. Node.js and npx need to work on that computer. Finish the installer, restart the app, then approve the Kabo connection in your browser.

Grok Bot: install the Bot and save the Skills

On the Grok Bot setup page, use the direct installation option and add the Bot. It runs setup on its own cloud computer and presents a Connect card for Kabo sign-in. Wait for installation and authorization to finish before sending a research task.

The Bot also needs to save the Kabo Skills so it can load them later. Ask it to confirm that they are available after installation. A copied template alone does not carry over its connection or Skill scripts.

Muse: find the Skills and authorize the connector

Send the command from the Muse setup page to Muse and let it finish setup. Ask Muse to check that it can find the Kabo Skills, then follow its Connect card to authorize Kabo as a custom connector. Muse Code is a separate command-line agent with its own setup instructions.

For an example of what to do after connecting, see using Muse for creator research.

Set up Codex, ChatGPT or Claude Code

Codex and ChatGPT share Kabo’s plugin-directory entry. Follow the Codex and ChatGPT setup page for that route; the terminal commands on the page are for Codex. In Codex, open a new task after signing in so the plugin loads.

Claude Code has its own plugin setup: reload plugins or start a new session, then use /mcp to select Kabo and sign in. The existing Kabo in Codex guide and Kabo in Claude Code guide cover creator tasks you can try once setup is complete.

Check that Kabo is connected

An installer finishing is only part of setup. Your assistant still needs an authorized connection and access to the Skills.

  1. Complete the restart, connector approval and browser sign-in steps for your assistant in the order shown in its setup instructions.
  2. Ask the assistant to check its Kabo connection and tell you which research tools are available.
  3. Ask it to find the Kabo getting-started Skill as well. A working connection and an available Skill are separate checks.

Kabo’s installation instructions use get_research_capabilities with an empty object for this check. That check uses no data allowance. Later research tasks can have their own usage requirements.

If the check returns an authentication error, reconnect Kabo through your assistant’s setup page and try the check again.

Optional: ask Kabo to help you start

Once connected, you can ask Kabo to help you choose a first task. This suggested prompt names the Skill explicitly and requests English output:

Please use the start-with-kabo Skill to get me started. Reply in English.

Kabo may ask which creator account you want to work with or what you want to do first. Share an account handle or describe your task. If you share a video link, explain whether you want feedback on it or help developing your own version.

In Grok Bot and Muse, look for this Skill under the name kabo-start-with-kabo. Use that name if the assistant cannot find start-with-kabo. You can leave the first task until later; setup does not require starting a full account review.

If setup stops before you can use Kabo

The instructions name a different assistant

Ask the assistant to show the installation results for the app you are using. If several apps were detected, follow the steps for yours. If your app is missing from the results, return to its setup page before changing settings in another app.

The Skill is missing

Start a fresh task or reload the app as your setup page recommends. In Doubao Work and Qwen Work, explicitly name start-with-kabo. If it is still unavailable, ask the assistant to check that the complete Skill folders and their Python scripts were installed.

The connection asks for authorization

Open the browser sign-in or Connect card. In Doubao Work, first confirm that you added the HTTP connector; installing Skills alone leaves that step unfinished. Use the Kabo address from the official setup page.

Research works, but saving to your Kabo workspace fails

An older Kabo authorization may lack workspace write access. Follow your client’s current reconnect instructions and review the requested permissions. You can ask the assistant to explain what needs authorization before retrying a save.

Setup questions

Do I need a Kabo account or API key to install?

The installation itself needs neither. When Kabo first needs access, you sign in through your browser. Follow the authorization screen rather than pasting a password or API key into the chat.

Can I use the same steps in a normal Doubao, Qwen or DeepSeek chat?

Use the steps for the exact client named in the table. A regular chat account under the same brand is not the same setup as Doubao Work, Qwen Work or DeepSeek Harness. Look for the matching client and connector settings first.

What if my assistant is not listed?

Other clients need a remote MCP connection with OAuth. Running Kabo’s Skills also requires readable and writable files plus Python 3. Check the Kabo MCP documentation and your client’s capabilities before attempting a manual connection.

Choose your assistant and install Kabo

Sources

Setup details follow Kabo’s client instructions and installer version 0.0.4, checked November 17, 2026. Menus and app availability can vary by version and region; use the current setup page for your client.